Time commitments may vary as this is a custom built transmission
Invest in a Monster Transmission and make your Opponent "EAT YOUR SHIFT!"
SS Mega Monster Transmissions
Engineered to Dominate, the FORD AODE 4x4 SS Mega Monster transmission is tough enough to withstand the rigors of even the toughest trucks & street machines delivering tire-spinning shifts race after race. It is ideal for vehicles powered by engines producing up to 600 horsepower with a naturally aspirated system using pump gasoline. Equipped with a Manual/Automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears giving you all the right to say "Eat My Shift!". When you use the manual gear selection feature, the Mega Monster up-shifts and downshifts when you move the shift lever. When you select the normal drive position, the transmission retains its firm, automatic shifts for the ease of driving you look for in an automatic transmission.
The SS Mega Monster Transmission features: the latest technology in our industry with only the best internal components for increased strength, dependable performance and monster torque capacity. All Monster transmissions are custom made in the USA and quality checked to ensure your peace of mind. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected and adjusted properly.
OVERHAUL KIT
HIGH PERFORMANCE REPROGRAMMING SHIFT KIT
INTERMEDIATE CLUTCH PACK
REVERSE INPUT DRUM
FORWARD INPUT CLUTCH DRUM
MODIFIED SUNGEAR TO INCREASE REAR PLANETARY LUBRICATION
HIGH PERFORMANCE BAND
UPDATED & MODIFIED LOW/REVERSE SERVO & COVER
DIRECT CLUTCH DRUM
MODIFIED OVERDRIVE SERVO
NEW 2-3 ACCUMULATOR
NEW UPDATED DOUBLE LIP 3-4 ACCUMULATOR
RECALIBRATED VALVEBODY w/UPDATE TV VALVE ASSEMBLY
RECALIBRATED VALVE PLATE FOR SHIFT FIRMNESS
NEW HIGH FLOW FILTER
*Special Note: If you are planning a direct transmission swap it is recommended to re-use your existing tail-housing and speedometer gear. This does not come equipped with a new Speedometer Gear. Certain vehicle specific tail-housings may not be available with this unit. In most cases, you will be required to swap your original tail-housing (this will NOT void your warranty). Please Contact Us to purchase a proper speedometer gear for your application or if you are unsure if your tail-housing will need to be reused.