- This crossmember will fit a 700R4, 4L60, & 4L60E
- Long Lasting Black Powder Coat Finish.
- Includes all new mounting hardware.
- Don't forget to add the transmission mount
Note: The Distance between the crossmember frame holes is approximately 30-3/8". You'll need to measure your frame or crossmember to insure proper selection.
Installation Notes: A determining feature is the crossmember center tube has a 1/2" drain slot located on the bottom and on the passenger side next to the hump weldment. The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom. To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock 3/8 hardware, its it strongly recommended that the installer obtains grade 8 fasteners and washers to compensate.