Home > Accessories > Crossmembers > GM-Chevrolet Crossmembers > A-Body, Chevelle, GTO, Cutlass > 1964-67 Chevelle, Malibu, El Camino, Skylark, GS, Cutlass, 442, F85, Lemans, Tempest, GTO Crossmember - TH400 Hardtops

1% off

1964-67 Chevelle, Malibu, El Camino, Skylark, GS, Cutlass, 442, F85, Lemans, Tempest, GTO Crossmember - TH400 Hardtops

All new Crossmember made for a 1964-67 Chevelle , Malibu, El Camino, Skylark, GS, Cutlass, 442, F85, Lemans, Tempest, GTO This crossmember will fit a TH400 (Short Tail) & 4L80E (Some 1967s) Long Lasting Black Powder Coat Finish.

Monster Sale Price: 549.95

MSRP:$554.99

Monster Savings of:$5.04(1%)

Product Available

Part Number:ACM-6467-TH400-H

Questions? Call Us 800-708-0087

Transmission Mount

TH400 Trans Mount (+$17.94)

Quantity

Description
---> Product Reviews from Verified Buyers <---

All new Crossmember made for a 1964-67 Chevelle, Malibu, El Camino, Skylark, GS, Cutlass, 442, F85, Lemans, Tempest, GTO

This crossmember will fit a TH400 (Short Tail) & 4L80E (Some 1967s)
Long Lasting Black Powder Coat Finish.
Includes all new mounting hardware.
Don't forget to add the transmission mount

Note: The Distance between the crossmember frame holes is approximately 30-3/8". You'll need to measure your frame or crossmember to insure proper selection.

Hardtops (Note: Distance between crossmember frame holes is approximately 53-5/8". Measure your frame or crossmember to insure proper selection)

Installation Notes: A determining feature is the crossmember center tube has a 1/2" drain slot located on the bottom and on the passenger side next to the hump weldment. The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom. To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock 3/8 hardware, its it strongly recommended that the installer obtains grade 8 fasteners and washers to compensate.

There are no reviews for this product!