Monster Transmission located here in sunny Brooksville, FL doesn’t just sell Transmissions, they re-manufacture, completely
rebuild, and test every single one before it leaves the building. First check out our video of how we actually test every transmission.
Then scroll below to see the steps, the photos and a look inside of what it takes to build a Monster Transmission.
We have a very thorough and lengthy process for building a Monster Transmission. A transmission is a vital part of your
drivetrain so we have many checks and balances in place to make sure we live up to our High Quality claim. We want to
help protect your investment and provide you with a transmission that shifts better, and lasts longer!
Thanks for visiting us and feel free to call or contact us for any questions you might have.
(800) 708-0087 :: Monday - Friday 8am - 8pm.
Monster Transmission Main Offices and Production Top of Page >
Transmission Core Inventory Top of Page >
Once an order is placed, the information is transferred to one of our Lead Technicians in the Tech Review Department. This is
where all of the technical details of your order are verified. A Quality Control Form is then assigned to the order and stays with
the transmission as it travels through each Department.
All of our transmission cores are brought in and accounted for. Using our inventory system we hand pick each core. Inspecting
it for any obvious cracks or issues. After that initial check is approved it’s sent off to the Tear Down Department.
TransmissionTear Down and Cleaning Top of Page >
In the Tear Down Department they’ll hand clean each transmission core with pneumatic air tools while inspecting each one for
any issues. When all the main crud and grime is cleaned they are then placed in one of our many high heat water cleaning
units. This really gets the mess out of all the crevices and corners.
After an entire cleaning, the transmission is thoroughly checked again and prepped for coating; whether painted, or our new
patent pending ViziKoat process. When it leaves the Tear Down Dept., you can eat off of our super clean transmission cases.
Transmission Build Top of Page >
The Build Department is next to receive the transmission case with all of the goodies to go inside! The transmission parts are
scanned out of the inventory system and prepared for assembly by the Parts Department. Each order is reviewed a second
time by an experienced transmission builder. They fulfill any special requests from the client, which may include the shift
firmness, shift timing, custom pan, etc.
Just before the transmission is completely assembled, a simple air check and static test is performed to ensure he/she didn’t
miss anything. The Builder then gives his seal of approval and the order moves to the Testing Department.
Quality Control and Transmission Parts Top of Page >
Transmission Installation and Testing Top of Page >
Monster is the first and only transmission company in the world with a Chassis-Dyno. We put each Monster Transmission
through a “real-world” testing experience. We Bench Test, Pressure Test and Solenoid Test our transmissions to ensure that
your transmission will run exactly as it should Many of our transmissions are installed into a test vehicle and driven! During these extensive
test-drives, we check line pressures, shift points, shift firmness, temperatures and much more. Here at Monster Transmission,
we go through all of these extra efforts to give you peace of mind. We know it’s not the easiest way to test, but it’s the
Shipping and Receiving Top of Page >
Crossing the Finish Line! The last step in the making of a Monster Transmission is the Freight Department. This is where it
receives the finishing touches that we are known for. One last inspection and cleaning is performed to make sure the order
is 100% complete. From top to bottom, inside and out, every transmission that leaves the door must meet our extremely
high standards of quality and craftsmanship.
Offices and Displays Top of Page >